Installation specifications and requirements for wall mounted charging pile
Release time：
2022-08-09
Source：
Installation specifications and requirements for wall mounted charging pile
Recently,many students and customers are asking our manufacturers.How to install the wall mounted charging pile?What is the installation specification of wall mounted charging pile?As the wall mounted AC self charging pile is mostly installed in an underground and semi underground engineering garage,it saves more space than the column charging pile.However,many people do not know what are the requirements of the installation specifications of this charging pile.I will solve this problem for you today.
Wall mounted charging piles are generally installed in underground and semi underground garages and shall meet the following requirements:
1.The waterproof design enterprise of the underground part shall reasonably determine the waterproof elevation according to the actual situation of the project;
2.The charging gun position of the wall mounted charging pile charging equipment shall not be less than 0.6m or 1.2m above the ground;
3.Before charging technical equipment of charging pile,protective management measures shall be installed to prevent vehicles from impacting charging facilities and equipment;
4.The wall mounted charging pile charging equipment built in the same period shall be set up in a centralized manner,and the walls with a fire resistance rating of no less than 2.00h,Class B fire doors and other fire isolation facilities,fire rolling shutters and ordinary parking lots shall be used.
5.When the cast-in-place equipment of cast-in-place pile adopts wall mounted support,the support part shall be reinforced concrete,and the wall thickness shall not be less than 200mm,and the load of the cast-in-place equipment in the support wall shall be considered.
6.The AC self charging technical equipment shall adopt 380/220V voltage for grade power supply,and the charging facilities and equipment grounding management system is TN-S.
7.The low-voltage circuit breaker supplying power to the charging equipment shall have short circuit protection and residual current protection functions.The rated action control current for residual working current protection is 30mA,and the action development time shall not exceed 0.1s.
The grouping arrangement of wall mounted charging pile equipment shall adopt chain power supply.
Main functions:
1.Interface display:friendly human-computer interaction design interface,multiple charging management modes can be selected,charging learning progress,IC card balance and other information.
2.Identification:read IC card information to identify customer identity and relevant information.
3.Metering management function:the embedded control system can be used as the main controller to communicate with the electric energy meter and obtain the charging energy data information.
4.Remote monitoring:with CAN,RS485 and other communication interfaces,it can realize network monitoring of the operation information of the charging pile.
5.Safety protection:It has the functions of overcurrent,overvoltage,undervoltage,electric leakage,lightning protection,emergency stop protection,etc.
6.Charging protection:power off automatically in case of abnormal charging,and stop automatically after charging.
7.Status indication:set a status indication to indicate different working and living conditions.
8.Anti theft:key switch and card swiping start,equipped with anti-theft lamp.
9.The UnionPay card has the functions of charge system,bus card all-in-one card management and mobile phone APP.
The above is the installation specification requirements of wall mounted charging pile!
Wall mounted charging pile,charging pile,garage
Related news
How much do you know about the characteristics of group charging piles?
With the promotion of low-carbon travel,more and more electric vehicles appear in everyone's view.Not only is the sales of electric bicycles increased,but also electric buses are vigorously promoted,and electric cars are also everywhere.
The function of the DC single and double gun charging pile is similar to that of the fuel dispenser in the gas station.It can be fixed on the ground or on the wall,installed in public buildings(public buildings,shopping malls,public parking lots,etc.)and residential parking lots or charging stations,and can charge various electric vehicles according to different voltage levels.
Safety requirements of DC single and double gun charging pile!Please click!
The DC single and double gun charging pile is the auxiliary equipment of the charger,which is used for slow and fast charging of electric vehicles,providing charging interface,human-computer interface and other functions,controlling the charging of electric vehicles,realizing charging on-off,card insertion charging and other operations.
Now new energy vehicles are more and more popular and can be seen everywhere.New energy vehicles are not only economical and environmentally friendly,but also powerful.However,many citizens do not know enough about charging safety.
What should be paid attention to when charging DC single and double gun charging piles?
The function of DC single and double gun charging pile is similar to that of the fuel dispenser in the gas station.It can be fixed on the ground or wall and installed in public buildings(public buildings,shopping malls,public parking lots,etc.)
Let's know about the DC single and double gun charging pile
The DC single and double gun charging pile refers to the device installed on the electric vehicle to charge the battery pack using the ground AC power grid and the on-board power supply,including the on-board charger,the on-board charging generator set and the driving energy recovery charging device.
New energy electric vehicle charging pile equipment manufacturer
· Message
· Contact
Tel：86-29-86670439 86-13992894088
Add：Room 1227, Building C, Dongfang Yixiang City, No. 256 Changle West Road, Xincheng District, Xi 'an
Fax：86-29-86670439
Email：oydlkj@163.com
Copyright © 2022 Shaanxi Eurasia Electric Power Technology Co. LTD